DESCRIPTION
Grow Mat is three-dimensional Non-biodegradable erosion control mat manufactured of polyethylene. It used for slop and ground protection in road building, landscaping and landfill engineering works. Property dimensioned it prevents the sliding and washing out the soil and cover layer while facilitating rapid vegetation growth. Upon heavy rains and water flows, the reinforcing ability of Grow Mat prevents erosion of the otherwise vulnerable vegetation. Once vegetated, Grow Mat reduces runoff velocities and thereby increases infiltration and reduces discharge. Directly next to water courses, Grow Mat protects the banks from the sourcing action of water flow.
Uses
1.Sloping ground
2.highway embankments
3.Shores of reservoirs and lakes
4.Banks of rivers and ditches
5.Slopes of flood bunds
6.Dam spillways
7.Landscaping
8.Storm and irrigation channels
Advantages
1. Reduce speed of water flow by three dimensional network layers
2. Environmental friendly
3. Low heat absorption rate
4. High moisture retaining capacity
5. Allow uniform vegetation growth
6. Resists wide pH range
7. Woven
8. Prevents seed washout
9. Unaffected by most agricultural chemicals
10. Allow groundwater recharge
11. High tensile modules resists deformation and offers maximum root reinforcement
12. UV stabilized
Specification Compliance
General Specification for Civil Engineering Works 2006 Clause 7.97.
Physical & Mechanical Properties
Elongation: 360%
Tensile Strength: 3.2 kN/m
Water Flow Rate: >1000 L/sec/m2
Weight Mass Per Unit Area: 450 gm/m2
Thickness: 18mm
Filament Diameter: 0.75mm
Color: Green
Packaging
Roll Size :2m x 30m per roll
