DESCRIPTION
TufCote CT 200 is based on solvent free epoxy resins, modified with coal tar. It is supplied as a two pack material in pre-weighed quantities ready for on-site mixing and use. TufCote CT 200 is applied as two coats application. It is generally applied at a wet film thickness of 200 microns per coat, but can be applied at greater thickness to suit exposure conditions.
Uses
Provide chemical and abrasion resistance to prevent corrosion of concrete surfaces for application such as
1. Sea water tanks, channels and intakes
2. Manhole linings
3. Sewage works and effluent plants
4. Chemical processing
5. Foundation waterproofing
6. Jetties, piers and docks
7. Pipe Coating
Advantages
1. Excellent Chemical and abrasion resistance.
2. Low cost service life.
3. Does not support bacterial growth.
4. Acts as an impermeable waterproof coating.
5. No primer required.
6. Can be applied to green concrete by brush, roller or spray.
Specification Compliance
ASTMD 543
BS1881 Part 207
BSEN12390 Part8:2000
Physical & Mechanical Properties
Color of Part A: Clear liquid
Color of Part B: Black Viscous Liquid
Mixed Density: 1.35 gm/cc
Bond Strength: 3 N/mm2
Water permeability: Nil
Pot Life: 75 mins
Tack Free Time: 3 hours
Over Coating Time: 6 hours
Complete Cure: 7 hours
Packaging
20 litre pack
